Siemens SITRANS transmitters P200, P210 and P220 are compact single-range-transmitters for measurement of absolute and gauge pressure.
In this series we use two different kinds of pressure sensors: two stainless steel sensors and one ceramics sensor. So the measurement of process pressure, absolute pressure and hydrostatic pressure is an easy thing. The measured pressure will be transformed with these sensors into a 4…20-mA- resp. a 0…10-V-signal.
Device structure without explosion protection
The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm, installed in a stainless steel enclosure. It can be connected electrically with a device plug to EN 175301-803-A (IP65), an M12 device plug (IP67), a cable (IP67) or a Quickon cable quick screw connection (IP67). The output signal is 4 to 20 mA, 0 to 10 V or is available as an IO-Link signal.
Device structure with explosion protection
The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm, installed in a stainless steel enclosure. It can be connected electrically with a device plug fulfilling EN 175301-803-A (IP65) or an M12 device plug (IP67). The output signal is between 4 and 20 mA.
The pressure transmitter SITRANS P220 for gauge pressure is used in the following industrial areas:
Siemens SITRANS transmitters P200, P210 and P220 are compact single-range-transmitters for measurement of absolute and gauge pressure.
In this series we use two different kinds of pressure sensors: two stainless steel sensors and one ceramics sensor. So the measurement of process pressure, absolute pressure and hydrostatic pressure is an easy thing. The measured pressure will be transformed with these sensors into a 4…20-mA- resp. a 0…10-V-signal.
Device structure without explosion protection
The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm, installed in a stainless steel enclosure. It can be connected electrically with a device plug to EN 175301-803-A (IP65), an M12 device plug (IP67), a cable (IP67) or a Quickon cable quick screw connection (IP67). The output signal is 4 to 20 mA, 0 to 10 V or is available as an IO-Link signal.
Device structure with explosion protection
The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm, installed in a stainless steel enclosure. It can be connected electrically with a device plug fulfilling EN 175301-803-A (IP65) or an M12 device plug (IP67). The output signal is between 4 and 20 mA.
The pressure transmitter SITRANS P220 for gauge pressure is used in the following industrial areas:
Mechanical engineering
Shipbuilding
Power engineering
Chemical industry
Water supply
Enquiry for Siemens SITRANS P200/ P210/ P220 Transmitter
