The Series I2-1 Immersion Temperature Probes are designed to monitor the hot and chilled water lines throughout a building’s water distribution loop. The multiple temperature sensor outputs allow these sensors to connect to virtually any digital building controller. The Series IW2 SS thermowells allow the temperature sensors to be replaced without draining the water line. The temperature sensors are available in 4˝ and 6˝ insertion lengths.
Accuracy
Platinum RTD: ±0.6% @ 32°F (0°C); Nickel RTD: ±0.5°F @ 32°F (0°C); Balco RTD: ±0.1% @ 32°F (0°C); Thermistors: ±0.36°F from 32 to 158°F (0 to 70°C)
Operating Temperature
-32 to 240°F (-35.5 to 115.5°C)
Probe Diameter
1/4˝ (6.3 mm)
Cable Length
6´ (1.8 m)
Probe Material
304 SS
Mounting
1/2˝ threaded connection to fit Series IW2 thermowell
Dwyer Omega – Series I2-1 Immersion Temperature Probes
The Series I2-1 Immersion Temperature Probes are designed to monitor the hot and chilled water lines throughout a building’s water distribution loop. The multiple temperature sensor outputs allow these sensors to connect to virtually any digital building controller. The Series IW2 SS thermowells allow the temperature sensors to be replaced without draining the water line. The temperature sensors are available in 4˝ and 6˝ insertion lengths.
Accuracy
Platinum RTD: ±0.6% @ 32°F (0°C); Nickel RTD: ±0.5°F @ 32°F (0°C); Balco RTD: ±0.1% @ 32°F (0°C); Thermistors: ±0.36°F from 32 to 158°F (0 to 70°C)
Operating Temperature
-32 to 240°F (-35.5 to 115.5°C)
Probe Diameter
1/4˝ (6.3 mm)
Cable Length
6´ (1.8 m)
Probe Material
304 SS
Mounting
1/2˝ threaded connection to fit Series IW2 thermowell
Enquiry for Dwyer Omega – Series I2-1 Immersion Temperature Probes
