The Series L10 Flotect® Mini-Size Float Switches combine low cost with top quality materials and construction for great value and years of reliable liquid level control. Wide media compatibility is assured with a choice of brass or stainless steel bodies and external tees; polypropylene or SS floats. Two basic configurations are offered; with 1″ NPT male threads for direct side mounting through a half coupling or with factory installed tee for external mounting.
All Series L10 controls feature a hermetically sealed, magnetically actuated SPST reed switch which is encapsulated in a polypropylene housing. Units are quickly and easily adjusted for your choice of normally open or normally closed operation thanks to a unique design. Just loosen two screws and instantly slide the switch assembly to the action required. N.O. and N.C. markings are clearly visible. This feature also speeds switch replacement if damage occurs.
Three types of floats are offered to accommodate liquids with specific gravities as low as 0.5; maximum pressures to 2000 psig (137.8 bar). Wire leads are 22 AWG X 18″ (460 mm) and exit the switch assembly through 1/8″ male NPT threads. These controls are UL recognised and CSA listed.
Cable Material
N/A
Compliance
CE, CSA, UR
Electrical Connection
Cable
Enclosure Ratings
IP66, NEMA Type 4X, Weatherproof
Media Compatibility
Alcohols, Compatible Liquids, Oils, Water
Operating Temperature, Max
200 °F
Measurement Pressure Type
Gauge
Process Connection Size
1/8 in
Process Connection Type
NPT Male
Switch Note
1.5 A @ 24 Vdc res., 0.001 A @ 200 Vdc res., 0.5 A @ 120 Vac
Dwyer Omega – Series L10 Mini Float Switches for Liquid Control, Brass/Stainless Steel
The Series L10 Flotect® Mini-Size Float Switches combine low cost with top quality materials and construction for great value and years of reliable liquid level control. Wide media compatibility is assured with a choice of brass or stainless steel bodies and external tees; polypropylene or SS floats. Two basic configurations are offered; with 1″ NPT male threads for direct side mounting through a half coupling or with factory installed tee for external mounting.
All Series L10 controls feature a hermetically sealed, magnetically actuated SPST reed switch which is encapsulated in a polypropylene housing. Units are quickly and easily adjusted for your choice of normally open or normally closed operation thanks to a unique design. Just loosen two screws and instantly slide the switch assembly to the action required. N.O. and N.C. markings are clearly visible. This feature also speeds switch replacement if damage occurs.
Three types of floats are offered to accommodate liquids with specific gravities as low as 0.5; maximum pressures to 2000 psig (137.8 bar). Wire leads are 22 AWG X 18″ (460 mm) and exit the switch assembly through 1/8″ male NPT threads. These controls are UL recognised and CSA listed.
Cable Material
N/A
Compliance
CE, CSA, UR
Electrical Connection
Cable
Enclosure Ratings
IP66, NEMA Type 4X, Weatherproof
Media Compatibility
Alcohols, Compatible Liquids, Oils, Water
Operating Temperature, Max
200 °F
Measurement Pressure Type
Gauge
Process Connection Size
1/8 in
Process Connection Type
NPT Male
Switch Note
1.5 A @ 24 Vdc res., 0.001 A @ 200 Vdc res., 0.5 A @ 120 Vac
Switch Rating
30 VA: 0.14 A @ 220 Vac
Switch Type
SPST NO/NC
Weight
10 oz
Wire Gauge
18 AWG
Enquiry for Dwyer Omega – Series L10 Mini Float Switches for Liquid Control, Brass/Stainless Steel
