The FLMW and FLMH variable area flowmeters can be installed directly in the fluid line without flow straighteners or special piping. The spring-and-piston type assembly enables these flowmeters to be mounted in any position and protects them against changes in viscosity. Available scaled for water or oil, in Aluminum, Brass or Stainless Steel bodies.
The FLMW or the FMLH Series with the optional analog output (-MA) are typically used to transmit a signal proportional to the flow rate to a process controller, a PLC, a recorder, or a panel-mount display. With the -MA options the user can choose between reading a 0 to 2000 Hz square-wave pulse, a 0 to 5 Vdc analog signal, or a 2-wire 4 to 20 mA analog signal by connecting the appropriate pins.
SPECIFICATIONS Accuracy: ± 2% FS over the entire scale range Repeatability: ± 1% Flow Measuring Range: 0.4 – 560 lpm (0.1 – 150 gpm) Maximum Operating Pressure: Aluminum and brass monitors: 3500 psig (240 Bar) Stainless steel monitors: 6000 psig (410 Bar) up to 116°C (240°F) Maximum Operating Temperature: Standard Models: 116°C (240°F) High Temp (-HT) Models: 204°C (400°F) max Ultra High Temp (-UHT) Models: 316°C (600°F) max Pressure Differential: download spec sheet for pressure drop graphs Standard Calibration Fluids: Oil monitors: DTE 25 @ 43°C (110°F), 0.873 sg Water monitors: tap water @ 21°C (70°F), 1.0 sg Maximum Particle Size: 76 microns Relay (Optional): 1 or 2 form “C” relays, rated 10 A @ 125 or 250 Vac or 0.25 A @ 250 Vdc Mechanical Life: >107 cycles Analog Output (Optional): Supply voltage 12 to 35 Vdc, field selectable for 0 to 5 Vdc (100 W minimum load), 0 to 2000 Hz square-wave pulse or 4 to 20 mA; Rmax = 50 (Vs-12). Vs = supply voltage DC Installation Dimensions: 1/4 and 1/2 NPT Sizes: 1-7/8 OD x 6.6″ length 3/4 and 1 NPT Sizes: 2-3/8 OD x 7.2″ length 1-1/4 and 1-1/2 NPT Sizes: 3-1/2 OD x 10.1″ length
Dwyer Omega – FLMH-FLMW Series Variable Area In-line Liquid Flow Meters
The FLMW and FLMH variable area flowmeters can be installed directly in the fluid line without flow straighteners or special piping. The spring-and-piston type assembly enables these flowmeters to be mounted in any position and protects them against changes in viscosity. Available scaled for water or oil, in Aluminum, Brass or Stainless Steel bodies.
The FLMW or the FMLH Series with the optional analog output (-MA) are typically used to transmit a signal proportional to the flow rate to a process controller, a PLC, a recorder, or a panel-mount display. With the -MA options the user can choose between reading a 0 to 2000 Hz square-wave pulse, a 0 to 5 Vdc analog signal, or a 2-wire 4 to 20 mA analog signal by connecting the appropriate pins.
SPECIFICATIONS Accuracy: ± 2% FS over the entire scale range Repeatability: ± 1% Flow Measuring Range: 0.4 – 560 lpm (0.1 – 150 gpm) Maximum Operating Pressure: Aluminum and brass monitors: 3500 psig (240 Bar) Stainless steel monitors: 6000 psig (410 Bar) up to 116°C (240°F) Maximum Operating Temperature: Standard Models: 116°C (240°F) High Temp (-HT) Models: 204°C (400°F) max Ultra High Temp (-UHT) Models: 316°C (600°F) max Pressure Differential: download spec sheet for pressure drop graphs Standard Calibration Fluids: Oil monitors: DTE 25 @ 43°C (110°F), 0.873 sg Water monitors: tap water @ 21°C (70°F), 1.0 sg Maximum Particle Size: 76 microns Relay (Optional): 1 or 2 form “C” relays, rated 10 A @ 125 or 250 Vac or 0.25 A @ 250 Vdc Mechanical Life: >107 cycles Analog Output (Optional): Supply voltage 12 to 35 Vdc, field selectable for 0 to 5 Vdc (100 W minimum load), 0 to 2000 Hz square-wave pulse or 4 to 20 mA; Rmax = 50 (Vs-12). Vs = supply voltage DC Installation Dimensions: 1/4 and 1/2 NPT Sizes: 1-7/8 OD x 6.6″ length 3/4 and 1 NPT Sizes: 2-3/8 OD x 7.2″ length 1-1/4 and 1-1/2 NPT Sizes: 3-1/2 OD x 10.1″ length
Enquiry for Dwyer Omega – FLMH-FLMW Series Variable Area In-line Liquid Flow Meters
