SITRANS FUG1010 clamp-on non-intrusive ultrasonic flowmeter is ideal for numerous natural and process gas applications. It uses an internal AGA-8 table for fixed gas composition to compute standard volume and is in compliance with AGA-10 speed of sound measurement practices.
The meter is available in single, dual and optional four channel/path configurations. There are three enclosures to choose from: wall mount, wall mount explosionproof and compact explosionproof.
Application examples include check metering, flow survey verification, lost and unaccounted for (LAUF) gas analysis, and production and storage.
Benefits
Easy installation; no need to cut pipe or stop flow
Minimal maintenance; external sensors do not require periodic cleaning
No moving parts to foul or wear as found in turbine and PD meters
Eliminates the pressure drop or energy loss in orifice metering
Wide turn-down ratio
Choice of single, dual or optional four path versions
Single path version reduces initial investment
Multiple path versions provide higher accuracy, especially with limited straight run and poor flow profile conditions
In diametric reflect mode configuration, the meter is less sensitive to crossflow and swirl
Wide-Beam technology provides improved accuracy over a wide range of flow velocity and operating pressure
ZeroMatic Path automatically sets zero without stopping flow and reduces zero drift, even at low flow
Tolerant of most wet gas conditions
Immune to most pressure reducing valve noise
Optional rugged stainless steel sensor enclosure permits permanent and direct burial installations
Easy to use “Si-Ware” diagnostic software
Application
SITRANS FUG1010 is ideal for most natural and process gas industry applications, including:
SITRANS FUG1010 clamp-on non-intrusive ultrasonic flowmeter is ideal for numerous natural and process gas applications. It uses an internal AGA-8 table for fixed gas composition to compute standard volume and is in compliance with AGA-10 speed of sound measurement practices.
The meter is available in single, dual and optional four channel/path configurations. There are three enclosures to choose from: wall mount, wall mount explosionproof and compact explosionproof.
Application examples include check metering, flow survey verification, lost and unaccounted for (LAUF) gas analysis, and production and storage.
Benefits
Easy installation; no need to cut pipe or stop flow
Minimal maintenance; external sensors do not require periodic cleaning
No moving parts to foul or wear as found in turbine and PD meters
Eliminates the pressure drop or energy loss in orifice metering
Wide turn-down ratio
Choice of single, dual or optional four path versions
Single path version reduces initial investment
Multiple path versions provide higher accuracy, especially with limited straight run and poor flow profile conditions
In diametric reflect mode configuration, the meter is less sensitive to crossflow and swirl
Wide-Beam technology provides improved accuracy over a wide range of flow velocity and operating pressure
ZeroMatic Path automatically sets zero without stopping flow and reduces zero drift, even at low flow
Tolerant of most wet gas conditions
Immune to most pressure reducing valve noise
Optional rugged stainless steel sensor enclosure permits permanent and direct burial installations
Easy to use “Si-Ware” diagnostic software
Application
SITRANS FUG1010 is ideal for most natural and process gas industry applications, including:
